V2 Cleaver Roof System / 2026+ Passport
Pairs well with
Questions? Ask our Experts
Our product specialists are here for you, just leave us a message!
V2 Cleaver Roof System / 2026+ Passport
Description
The V2 Cleaver Roof System is the second-generation No-Lo Designs low-profile roof rack engineered specifically for the 2026+ Honda Passport. Built around a 49.5" x 85" platform with 8 crossbars, it gives you a wide, flat surface to mount roof boxes, awnings, lights, recovery gear, camp supplies, and more - exactly where you need it. Every mounting point, bracket, and crossbar is purpose-built to match the Passport's roofline and factory load limits.
What sets the Cleaver apart is its rigorous, independently verified engineering. A third-party engineer reviewed the rack using finite element analysis (FEA) at 210 lb of distributed payload, 3.3G vertical loading, and 1G horizontal cornering load - confirming a minimum bracket safety factor of 2.03x for yielding and no yielding predicted in any analyzed load case. This is a rack built for confident, capable adventurers who demand more than a stock solution for their Passport.
Key Features
- Second-Generation No-Lo Design: The Cleaver is the updated, evolved version of the original Katana rack - refined for greater capability and a distinctive look.
- 49.5" x 85" Platform: A large, flat deck gives you serious real estate for roof boxes, awnings, lights, recovery gear, and camp equipment.
- 8 Crossbars: Flexible crossbar layout lets you position gear exactly where you need it across the full platform.
- 210 lb Payload Analyzed: Third-party FEA engineering review confirmed performance at 210 lb of distributed payload - matching Honda's published accessory crossbar limit for the 2026 Passport.
- Bracket Safety Factor of 2.03x: Independent engineering analysis showed a minimum bracket safety factor of 2.03x for yielding and maximum deflection of only 0.19 inches.
- Stainless Steel Hardware & Brackets: All mounting brackets and hardware are stainless steel for long-term corrosion resistance in all conditions.
- Lamin-X Paint Protective Film Included: Protects your Passport's roof finish at every contact point right out of the box.
- Approximately 62 lbs: The rack itself weighs approximately 62 lbs - factor this into your total roof load when planning your build.
- Limited Lifetime Structural Warranty: Backed by a limited lifetime structural warranty when installed and loaded correctly per the instructions.
- U.S.-Based Support & Fast Shipping: Ships free in the continental U.S., with most orders dispatched within 1 to 3 business days.
What's Included
- Complete Cleaver roof rack
- Lamin-X paint protective film
- Stainless steel mounting brackets
- 8 crossbars
- Stainless hardware
- Installation instructions
- U.S.-based support
- Limited lifetime structural warranty
Why You'll Love It
The Cleaver is one of the few roof rack solutions built from the ground up specifically for the 2026+ Honda Passport, and that specificity shows in every detail - from how the brackets mount to how the platform sits on your roofline. It's trusted by Passport owners who want a capable, adventure-ready rig without compromise. The third-party FEA engineering review gives you confidence that this rack was designed to perform, not just to look good. With stainless hardware, paint protection film, and a limited lifetime structural warranty, the Cleaver is built for years of dependable use on the trail and on the road. Whether you're heading to a campsite or a trailhead, this rack handles your gear so you can focus on the adventure. For Passport owners who are serious about their builds, the V2 Cleaver is the definitive rooftop solution.
Product Specifications
View Product Specs
| Compatible Vehicle | 2026+ Honda Passport |
|---|---|
| Platform Dimensions | 49.5" x 85" |
| Number of Crossbars | 8 |
| Rack Weight | Approximately 62 lbs |
| Analyzed Payload | 210 lb distributed payload |
| FEA Vertical Load | 3.3G |
| FEA Horizontal Load | 1G (cornering) |
| Mounting Points | 6 points secured |
| Minimum Bracket Safety Factor | 2.03x for yielding |
| Maximum Deflection | 0.19 inches |
| Hardware Material | Stainless steel |
| Bracket Material | Stainless steel |
| Engineering Review | Independent third-party finite element analysis (FEA) |
| Warranty | Limited lifetime structural warranty |
| Shipping | Free shipping in continental U.S.; most orders ship in 1-3 business days |
| Design Generation | Second generation (No-Lo V2) |
FAQ
Is the V2 Cleaver compatible with my 2026+ Honda Passport?
Yes - the Cleaver is designed and built exclusively for the 2026+ Honda Passport. It is engineered to match the specific roofline shape, factory mounting points, and Honda's published roof load limits for that model year and beyond.
What is the maximum weight I can carry on the Cleaver?
Honda's 2026 Passport Feature Guide allows up to 210 lb of cargo when using accessory crossbars. The Cleaver was analyzed at 210 lb of distributed payload by a third-party engineer. However, remember that the rack itself weighs approximately 62 lbs, so factor that into your total roof load. Always follow Honda's owner's manual and never exceed the lowest applicable load limit.
What is the difference between the Cleaver and the Katana?
The Cleaver is the second-generation version of the No-Lo roof rack lineup, replacing the original Katana design. The Cleaver features a higher engineering load case - analyzed at 210 lb versus the Katana's 165 lb - along with the updated Cleaver aesthetic. It is the more capable, more refined option for buyers who want maximum payload performance.
Does the Cleaver come with everything I need for installation?
Yes. The package includes the complete Cleaver roof rack, stainless steel mounting brackets, 8 crossbars, stainless hardware, Lamin-X paint protective film, and full installation instructions. U.S.-based support is also available if you have questions during the install process.
Will the Cleaver damage my Passport's roof paint?
The Cleaver includes Lamin-X paint protective film, which is applied at the contact points between the rack and your roof to guard against scratches and wear. As long as the rack is installed correctly per the included instructions, your paint finish will be protected.
What does the limited lifetime structural warranty cover?
The limited lifetime structural warranty covers the structural integrity of the rack when it is installed and loaded correctly according to the provided instructions. It is important to check all fasteners before each use and after your first trip. Refer to the warranty documentation included with your rack for full terms and conditions.
How does the rack ship and how long does delivery take?
The V2 Cleaver ships free within the continental United States. Most orders are dispatched within 1 to 3 business days. International orders may be subject to additional duties, fees, and taxes that are the responsibility of the customer.
Thank you for trusting us with your order! This product is shipped directly from the manufacturing warehouse to get to customers all over the U.S. as soon as possible!
While many of our products are prepared and shipped out within 48 hours, some of our items are built to order or require custom pieces that could take 2-6 weeks to prepare before shipping! Please contact us at 888-884-2234 for a delivery ETA if you have a strict timeline.
Thanks!
Omaha Sports & Games Team
Returns & Refunds Policy
Return Policy
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. To start a return, you can contact us at service@omahasportsandgames.com.
If your return request is accepted, it will be up to you as the buyer to return the item in its original packaging, unworn and unused. You as the buyer will be responsible for paying the return shipping. We may be able to assist you in scheduling a pickup for return but the payment will still be your responsibility. You can always contact us for any return question at service@omahasportsandgames.com.
All products are subject to a minimum 15% restocking fee based on the quality of the returned product and packaging.
Items opened, tested, used, or any other non-new condition may be eligible for return based on the manufacturer's return policy.
Shipping Damages and Issues
You must inspect your order upon reception and refuse delivery if you see damage. DO NOT sign for delivery if there is apparent damage to the product. If you sign for the delivery and later claim shipping damage, there is very little we can do to help.
If your order does not require signing at delivery and is instead just dropped off at doorstep with damage, contact us immediately with photos of the damaged boxes.
If your item(s) is defective, damaged or if you receive the wrong item, contact us immediately so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, such as custom products, special orders or personalized items. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items, gift cards, or multiple product bundle discounts.