DV8 Offroad 2025-2026 Toyota 4Runner Spec Series Roof Rack
Pairs well with
FREE Shipping!
Need Help? Chat With Our Experts
We live and breathe the games we sell
DV8 Offroad 2025-2026 Toyota 4Runner Spec Series Roof Rack
Description
The DV8 Offroad Spec Series Roof Rack is purpose-built for the 6th Generation Toyota 4Runner (2025-2026), delivering a refined combination of ultra-low profile design, structural strength, and virtually unlimited mounting versatility. Ten 80/20 T-slot crossbars with M6 T-nuts run the full length of the rack, giving you a mounting platform ready for rooftop tents, storage boxes, recovery gear, lighting, and more. Unlike competing racks, this design makes no contact with your body panels, eliminating the need for rubber trim while keeping the rack as close to the roofline as possible - even on sunroof-equipped models.
The 90-degree bent sidewalls aren't just for looks - they add serious rigidity and integrate full-length side mounting slots for scene lights, awnings, axes, or any other trail essentials. An angular wind deflector is engineered to follow the 4Runner's body lines and reduce wind noise more effectively than the rounded fairings found on competitor racks. Exterior-facing mounting bolts on the outer edges of the sidewalls mean you can assemble the rack on the ground, load it with your RTT and gear, lift the entire assembly onto the pre-installed roof rail feet, and bolt it down without awkward reaching or unloading.
Key Features
- (10) 80/20 T-Slot Crossbars: Uses M6 T-nuts for nearly endless mounting configurations - tie-downs, lights, gear mounts, and more.
- Ultra-Low Profile Design: The lowest-profile rack available for the 6th Gen 4Runner; no rubber trim required as it never contacts body panels.
- No-Contact Body Fitment: Rack sits above the roof without touching body panels, protecting your paint and eliminating trim hassles.
- Sunroof Compatible: Works seamlessly with sunroof-equipped 4Runners with no modifications required.
- 90-Degree Bent Sidewalls: Adds structural rigidity and integrates full-length side mounting slots for scene lights, awnings, and recovery tools.
- Rear Crossmember Light Bar Mount: Integrated mounting slots support up to a 40-inch rear light bar for camp and trail illumination.
- Steel Mounting Feet: Distribute weight evenly across the roof, capable of supporting rooftop tents, storage boxes, and heavy overland loads.
- Removable Rear Styling Fins: Remove to allow flush-mounted awnings, large rooftop tents, and other accessories.
- Exterior-Facing Mounting Bolts: Positioned on the outer sidewall edges for easy installation even when the rack is pre-loaded with gear.
- Angular Wind Deflector: Matches the 4Runner's body lines and outperforms competitor rounded designs for reduced wind noise.
- Lightweight Aluminum Construction: Side plates, crossbars, and rear structure are aluminum; steel mounting feet and gloss black accent panels add durability and style.
- Micro-Texture Black Powder Coat Finish: Durable finish paired with gloss black steel accent plate for a clean, premium appearance.
- Optional Light Cutout Fairing: Compatible with add-on light fairing (sold separately, PN# RRTF3-02L) for integrated front light bar mounting.
Shipping
Ships free! Please email us at service@omahasportsandgames.com for a delivery ETA or to confirm shipping details.
What's Included
- Spec Series Roof Rack assembly (aluminum side plates, crossbars, and rear structure)
- Steel mounting feet
- Gloss black steel accent panel
- Removable rear styling fins
- Angular wind deflector/fairing
- All required mounting hardware (M6 T-nuts and fasteners)
Why You'll Love It
DV8 Offroad has built a reputation among serious overlanders and off-road enthusiasts for designing parts that are CAD-engineered and trail-tested right here in the USA - and the Spec Series Roof Rack is no exception. Whether you're outfitting your rig for weekend camping, long-distance overlanding, or daily use, this rack handles it all without compromise. The innovative ground-assembly design means you can fully load your rack before it ever touches your roof, saving time and frustration on install day. Backed by a one-year limited warranty and engineered specifically for the 6th Gen 4Runner, this rack is a confident, long-term investment in your build. From trail-ready lighting setups to rooftop tent living, the Spec Series Roof Rack gives you the platform to take on anything.
Product Specifications
View Product Specs
| Fitment | 2025+ Toyota 4Runner - All Models |
|---|---|
| Material | Aluminum side plates, crossbars, and rear structure; steel mounting feet and accent panels |
| Finish | Micro-Texture Black Powder Coat with Gloss Black steel accents |
| Crossbars | 10 x 80/20 T-slot crossbars (M6 T-nut compatible) |
| Max Rear Light Bar Size | 40 inches |
| Installation Type | Bolt-on, no cutting required |
| Estimated Install Time | 4-6 hours (3 hours assembly + 1-3 hours installation) |
| Sunroof Compatible | Yes, no modifications required |
| Body Contact | None - no rubber trim required |
| Optional Add-On | Light Cutout Front Fairing (PN# RRTF3-02L, sold separately) |
| Prop 65 Warning | Contains lead, DEHP, and BPA - see P65Warnings.ca.gov |
| Warranty | 1-year limited warranty from date of purchase |
| Ships From | Chandler, AZ |
Manuals & Guides
FAQ
Will this roof rack fit my 4Runner if it has a sunroof?
Yes - the Spec Series Roof Rack is designed with an ultra-low-profile fitment that works seamlessly with sunroof-equipped 6th Gen 4Runner models. No modifications or additional parts are required.
Do I need to drill or cut anything to install this rack?
No cutting is required. This is a bolt-on installation that mounts to your 4Runner's factory roof rail mounting points. DV8 Offroad estimates the full installation at 4-6 hours - about 3 hours of assembly and 1-3 hours to mount on the vehicle.
Can I mount a rooftop tent (RTT) to this rack?
Yes. The rack is specifically designed to support rooftop tents, storage boxes, and other heavy overland gear. Steel mounting feet distribute weight evenly across the roof. Always refer to your vehicle owner's manual for the roof's maximum weight capacity rating.
What is the largest light bar I can mount on this rack?
The integrated mounting slots at the rear crossmember support a light bar up to 40 inches wide. For front lighting, an optional Light Cutout Front Fairing (PN# RRTF3-02L) is available separately to allow a front-mounted light bar setup.
What accessories can I mount to the side slots?
The full-length M6 side slots running the entire length of the sidewalls are compatible with scene lights, recovery tools (shovels, axes, hi-lift jacks), awning mounts, and more. The 90-degree bent sidewalls provide virtually unlimited mounting configurations from front to back.
What is DV8 Offroad's warranty on this rack?
DV8 Offroad covers this rack with a 1-year limited warranty from the date of purchase against defects in workmanship and materials. The warranty covers the cost of the product itself.
Thank you for trusting us with your order! This product is shipped directly from the manufacturing warehouse to get to customers all over the U.S. as soon as possible!
While many of our products are prepared and shipped out within 48 hours, some of our items are built to order or require custom pieces that could take 2-6 weeks to prepare before shipping! Please contact us at 888-884-2234 for a delivery ETA if you have a strict timeline.
Thanks!
Omaha Sports & Games Team
Returns & Refunds Policy
Return Policy
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. To start a return, you can contact us at service@omahasportsandgames.com.
If your return request is accepted, it will be up to you as the buyer to return the item in its original packaging, unworn and unused. You as the buyer will be responsible for paying the return shipping. We may be able to assist you in scheduling a pickup for return but the payment will still be your responsibility. You can always contact us for any return question at service@omahasportsandgames.com.
All products are subject to a minimum 15% restocking fee based on the quality of the returned product and packaging.
Items opened, tested, used, or any other non-new condition may be eligible for return based on the manufacturer's return policy.
Shipping Damages and Issues
You must inspect your order upon reception and refuse delivery if you see damage. DO NOT sign for delivery if there is apparent damage to the product. If you sign for the delivery and later claim shipping damage, there is very little we can do to help.
If your order does not require signing at delivery and is instead just dropped off at doorstep with damage, contact us immediately with photos of the damaged boxes.
If your item(s) is defective, damaged or if you receive the wrong item, contact us immediately so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, such as custom products, special orders or personalized items. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items, gift cards, or multiple product bundle discounts.