DEEP Robotics Lynx M20 Pro Quadruped Robot
Pairs well with
FREE Shipping!
Questions? Ask our Experts
Our product specialists are here for you, just leave us a message!
DEEP Robotics Lynx M20 Pro Quadruped Robot
Description
The DEEP Robotics Lynx M20 Pro is a high-performance quadruped inspection robot engineered for demanding industrial and commercial environments. Designed for autonomous operation, it combines advanced SLAM localization, omnidirectional obstacle avoidance, and dual high-density LiDAR sensors to navigate complex terrain with confidence. Capable of climbing stairs up to 25 cm high, tackling 45-degree slopes, and operating across temperatures from -20°C to 55°C, the Lynx M20 Pro is built for real-world deployment where reliability is non-negotiable. With an effective payload capacity of 15 kg and a maximum of 50 kg, it can carry the sensors and equipment your mission demands. Whether deployed in industrial inspection, infrastructure monitoring, or autonomous data collection, the Lynx M20 Pro sets a new standard for legged robotic platforms.
Key Features
- Dual 96-Line LiDAR: Two 360° x 90° LiDAR units capture approximately 860,000 points per second for comprehensive point cloud surround-view mapping.
- IP66 Protection Rating: Sealed against dust and powerful water jets, making it suitable for outdoor and harsh indoor industrial environments.
- 15 kg Effective / 50 kg Maximum Payload: Carries significant sensor or equipment loads without compromising mobility or endurance.
- Triple Octa-Core Computing Units: Three industrial-grade 64-bit octa-core processors (16 GB + 128 GB each) deliver the computational power needed for real-time autonomy.
- 3-Hour Endurance / 15 km Range (No Load): Long-running battery with a fast 1.5-hour recharge time keeps the robot mission-ready.
- Advanced Stair & Terrain Climbing: Handles continuous stair heights up to 25 cm, single steps up to 80 cm, and slopes up to 45 degrees.
- SLAM Localization & Autonomous Navigation: Onboard simultaneous localization and mapping enables fully autonomous route planning and execution.
- Omnidirectional Obstacle Avoidance: Detects and reacts to obstacles from all directions in real time (enabled via OTA upgrade).
- OTA Upgrades: Firmware and feature updates delivered wirelessly over the air, keeping the platform current without manual servicing.
- Broad Connectivity: Gigabit Ethernet, USB 3.0, and dual power interfaces (24V / 72V) support a wide range of payloads and integration scenarios.
Shipping
Ships free! Please email us at service@omahasportsandgames.com for a delivery ETA or to confirm shipping details.
What's Included
- DEEP Robotics Lynx M20 Pro quadruped robot (with battery)
Why You'll Love It
The Lynx M20 Pro is trusted by enterprises and research institutions that need a robot platform capable of operating where wheeled systems simply cannot go. Its combination of triple industrial processors, dual LiDAR, and wide-angle cameras makes it one of the most sensor-rich quadruped platforms available at this class. The IP66 rating and -20°C to 55°C operating range ensure it keeps working through rain, dust, cold, and heat. With autonomous charging as an optional add-on and OTA upgrades expanding capabilities over time, this is a platform that grows with your operation. For facilities managers, inspection teams, and research organizations seeking a dependable, high-payload autonomous robot, the Lynx M20 Pro is an investment built to deliver results for years to come.
Product Specifications
View Product Specs
| Standing Dimensions | 820 x 430 x 570 mm |
|---|---|
| Total Weight (including battery) | 33 kg |
| Effective Payload Capacity | 15 kg |
| Maximum Payload Capacity | 50 kg |
| No-Load Endurance Time / Range | 3 h / 15 km |
| With Effective Load Endurance Time / Range | 2.5 h / 12 km |
| Charging Time (single battery) | 1.5 h |
| Maximum Tested Speed | 5 m/s (lab testing; operating cap is 3 m/s) |
| Maximum Operating Speed | 2 m/s |
| Maximum Continuous Stair Height | 25 cm |
| Maximum Single Step Height | 80 cm |
| Maximum Slope | 45 degrees |
| Computing Unit | Industrial-grade 64-bit Octa-core Processor (16 GB + 128 GB) x 3 |
| LiDAR | 96-line, 360° x 90°, approx. 860,000 pts/s (x2) |
| Cameras | Wide-angle cameras x 2 |
| Protection Rating | IP66 |
| Operating Temperature Range | -20°C to 55°C |
| Power Interface | 24V / 72V |
| Gigabit Ethernet Port | Yes |
| USB | USB 3.0 |
FAQ
What is the maximum operating speed of the Lynx M20 Pro?
The Lynx M20 Pro has a maximum operating speed of 2 m/s. In laboratory extreme testing, it has achieved up to 5 m/s, but the actual product speed is capped at 3 m/s for safety and reliability in real-world deployment.
Is the Lynx M20 Pro waterproof or dustproof?
Yes. The Lynx M20 Pro carries an IP66 protection rating, meaning it is fully protected against dust ingress and can withstand powerful water jets. This makes it suitable for outdoor inspection work and demanding industrial environments.
Can the Lynx M20 Pro climb stairs?
Yes. The Lynx M20 Pro can handle continuous stair heights up to 25 cm and can navigate a single step up to 80 cm high. It can also traverse slopes of up to 45 degrees, though actual performance may vary depending on surface materials.
How long does the battery last, and how quickly does it recharge?
Without a payload, the Lynx M20 Pro runs for up to 3 hours and covers up to 15 km on a single charge. With an effective load, endurance is approximately 2.5 hours / 12 km. A single battery recharges in just 1.5 hours.
What connectivity and interfaces does the robot support?
The Lynx M20 Pro includes a Gigabit Ethernet port, USB 3.0, and dual power interfaces (24V and 72V), allowing integration with a wide range of external sensors, payloads, and data systems.
Is autonomous charging available?
Autonomous charging is available as an optional add-on. The Omnidirectional Obstacle Avoidance and Point Cloud Surround View features are enabled via OTA (over-the-air) upgrades after delivery.
Thank you for trusting us with your order! This product is shipped directly from the manufacturing warehouse to get to customers all over the U.S. as soon as possible!
While many of our products are prepared and shipped out within 48 hours, some of our items are built to order or require custom pieces that could take 2-6 weeks to prepare before shipping! Please contact us at 888-884-2234 for a delivery ETA if you have a strict timeline.
Thanks!
Omaha Sports & Games Team
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. To start a return, you can contact us at service@omahasportsandgames.com.
If your return request is accepted, it will be up to you as the buyer to return the item in its original packaging, unworn and unused. You as the buyer will be responsible for paying the return shipping. We may be able to assist you in scheduling a pickup for return but the payment will still be your responsibility. You can always contact us for any return question at service@omahasportsandgames.com.
All products are subject to a minimum 15% restocking fee based on the quality of the returned product and packaging.
Items opened, tested, used, or any other non-new condition may be eligible for return based on the manufacturer's return policy.
Shipping Damages and Issues
You must inspect your order upon reception and refuse delivery if you see damage. DO NOT sign for delivery if there is apparent damage to the product. If you sign for the delivery and later claim shipping damage, there is very little we can do to help.
If your order does not require signing at delivery and is instead just dropped off at doorstep with damage, contact us immediately with photos of the damaged boxes.
If your item(s) is defective, damaged or if you receive the wrong item, contact us immediately so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, such as custom products, special orders or personalized items. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items, gift cards, or multiple product bundle discounts.