Build Limitless Wall Mounted Functional Trainer - Dual 250 lb Stacks
Pairs well with
FREE Shipping!
Questions? Ask our Experts
Our product specialists are here for you, just leave us a message!
Build Limitless Wall Mounted Functional Trainer
Description
The Build Limitless® Wall Mounted Functional Trainer brings commercial-level cable training to your home or facility without consuming your entire floor plan. Built on the same proven wall-mounted rack platform PRx Performance is known for, this system pairs rack-grade steel construction with fully integrated dual cable stacks for a training experience that punches well above its footprint. Dual 250 lb weight stacks, a smooth 2:1 cable ratio, and aluminum pulleys let you train unilaterally or bilaterally across a wide range of exercises - from lat pulldowns and cable rows to chest flys, cable crunches, and beyond.
Adjustable crossmembers can be installed up to 6 inches outward to clear trim or uneven garage foundations, while heavy-duty adjustable feet keep the system perfectly level on any surface. Knurled handles and quick-adjust T-handle pop-pins make movement transitions effortless between sets. Compatible with PRx's Axis Pad® and Leg Curl/Extension attachments, this trainer gives you the range of an entire commercial gym in one streamlined, wall-mounted unit.
Key Features
- Dual 250 lb Weight Stacks: Independent stacks on each side enable unilateral and bilateral training with up to 500 lbs total resistance.
- 2:1 Cable Ratio: Provides smooth, consistent resistance feel across the full range of cable travel.
- 92.5" Cable Travel: Generous range of motion supports everything from low rows to overhead presses without restriction.
- Aluminum Pulleys: Precision-manufactured 2" and 4" aluminum pulley wheels for quiet, smooth cable glide under heavy loads.
- Adjustable Crossmembers: Can be mounted up to 6" outward to clear baseboards, trim, or challenging garage wall layouts.
- Heavy-Duty Adjustable Feet: Bottom crossmember feet keep the rack perfectly level and locked in on uneven floors.
- Quick-Adjust T-Handle Pop-Pins: Fast, tool-free movement transitions so you spend less time adjusting and more time training.
- 45" Trolley Spacing: Wide spacing supports a full range of cable crossover, chest fly, and functional movement patterns.
- J-Cups Included: Ready for barbell work right out of the box with integrated J-cup hardware.
- Limited Lifetime Warranty: Structural welds, frames, and hardware covered for the life of the original purchaser.
- Made in Fargo, ND: Manufactured with foreign and domestic materials by PRx Performance in the USA.
Height Options & Which to Choose
- 95" Height: The tallest configuration, ideal for ceilings at or above 8 feet. Maximizes cable travel range and is best suited for dedicated gym spaces, garages with high ceilings, or commercial installs where overhead clearance is not a concern.
- 89" Height: A versatile mid-height option that fits most standard 8-foot ceilings with a bit of clearance. Great for home gyms where ceiling height is a slight consideration but you still want generous cable range.
- 81" Height: The most compact height option, designed for spaces with lower or standard ceilings. Best for finished basements, tight garage setups, or any room where overhead clearance is limited.
Shipping
Ships free! Please email us at service@omahasportsandgames.com for a delivery ETA or to confirm shipping details.
What's Included
- Build Limitless® Wall Mounted Functional Trainer (frame and cable system)
- Dual 250 lb weight stacks (one per side)
- Aluminum pulleys (2" and 4")
- Adjustable crossmembers
- Heavy-duty adjustable feet
- Knurled handles
- Quick-adjust T-handle pop-pins
- J-cups
Why You'll Love It
The Build Limitless® Wall Mounted Functional Trainer is engineered for athletes and fitness enthusiasts who refuse to compromise on training capability just because they don't have a commercial gym floor plan. Manufactured in Fargo, ND by PRx Performance - one of the most trusted names in home and functional gym equipment - this trainer is built to handle the demands of daily use for years to come. The wall-mounted design reclaims valuable floor space while delivering every cable movement you'd expect from a full-size functional trainer. Whether you're programming for a competitive athlete, building a family fitness room, or outfitting a small commercial facility, this system scales to the job. With compatibility for PRx's expanding lineup of attachments including the Axis Pad® and Leg Curl/Extension, your training options only grow over time. This is the kind of investment that makes every square foot of your gym work harder.
Product Specifications
View Product Specs
| Overall Height | 97", 91", or 83" (varies by model selected) |
|---|---|
| Overall Width | 57 in |
| Overall Depth | 32 in to 38 in |
| Trolley Spacing | 45 in |
| Cable Travel | 92.5 in |
| Pulley Ratio | 2:1 |
| Pulley Wheel Material | Aluminum |
| Weight Stack | 250 lb per stack (500 lb total) |
| Cable Thickness | 4.8 mm (including rubber coating) |
| J-cups | Included |
| Warranty | Limited Lifetime (structural/frame/hardware); 90 Days (upholstery/coatings) |
| Origin | Made in Fargo, ND with foreign and domestic materials |
FAQ
What is the difference between the 95", 89", and 81" height options?
The height options refer to the overall rack height and are designed to fit different ceiling clearances. The 95" version is best for ceilings at or above 8 feet, the 89" fits most standard 8-foot ceilings, and the 81" is designed for lower ceilings such as finished basements. All height options share the same weight stack capacity, cable travel, and feature set.
Does this functional trainer require professional installation?
The Build Limitless® Wall Mounted Functional Trainer must be properly anchored to wall studs or a suitable mounting surface. PRx Performance recommends following the included installation instructions carefully. Improper installation voids the warranty, so if you are unsure about your wall structure, consulting a professional installer or contractor is a good idea.
Can I add attachments like a leg curl or preacher curl pad?
Yes - this system is compatible with PRx's Leg Curl/Extension Attachment and the Axis Pad® for preacher curls and other isolation movements. These are available as optional add-ons and dramatically expand the range of exercises you can perform without needing separate machines.
What exercises can I do with this functional trainer?
The Build Limitless® Wall Mounted Functional Trainer supports a wide variety of movements including belt squats, low rows, lat pulldowns, leg curl/extensions (with attachment), preacher curls (with Axis Pad), chest flys, crossover reverse flys, military press, cable crunches, and much more. The adjustable cable columns give you full flexibility to train virtually every muscle group.
What warranty does this product come with?
PRx Performance offers a Limited Lifetime Warranty on structural welds, frames, and installation hardware for the original purchaser. Upholstery, plastics, and coating finishes are covered for 90 days. The warranty covers defects in materials or workmanship under normal use and is non-transferable. Contact PRx at support@prxperformance.com or 701-566-0452 to file a claim.
Does the functional trainer come with weight stacks, or are they sold separately?
The Build Limitless® Wall Mounted Functional Trainer includes dual 250 lb weight stacks - one per side - as part of the standard package. No separate weight stack purchase is needed.
Thank you for trusting us with your order! This product is shipped directly from the manufacturing warehouse to get to customers all over the U.S. as soon as possible!
While many of our products are prepared and shipped out within 48 hours, some of our items are built to order or require custom pieces that could take 2-6 weeks to prepare before shipping! Please contact us at 888-884-2234 for a delivery ETA if you have a strict timeline.
Thanks!
Omaha Sports & Games Team
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. To start a return, you can contact us at service@omahasportsandgames.com.
If your return request is accepted, it will be up to you as the buyer to return the item in its original packaging, unworn and unused. You as the buyer will be responsible for paying the return shipping. We may be able to assist you in scheduling a pickup for return but the payment will still be your responsibility. You can always contact us for any return question at service@omahasportsandgames.com.
All products are subject to a minimum 15% restocking fee based on the quality of the returned product and packaging.
Items opened, tested, used, or any other non-new condition may be eligible for return based on the manufacturer's return policy.
Shipping Damages and Issues
You must inspect your order upon reception and refuse delivery if you see damage. DO NOT sign for delivery if there is apparent damage to the product. If you sign for the delivery and later claim shipping damage, there is very little we can do to help.
If your order does not require signing at delivery and is instead just dropped off at doorstep with damage, contact us immediately with photos of the damaged boxes.
If your item(s) is defective, damaged or if you receive the wrong item, contact us immediately so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, such as custom products, special orders or personalized items. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items, gift cards, or multiple product bundle discounts.