48V 100Ah V2-T Elite Series LiFePO4 Battery (5.12kWh)
Pairs well with
Questions? Ask our Experts
Our product specialists are here for you, just leave us a message!
48V 100Ah V2-T Elite Series LiFePO4 Battery (5.12kWh)
Description
The Epoch 48V 100Ah V2-T Elite Series LiFePO4 Battery delivers 5.12kWh of intelligent lithium energy storage in one rugged, sealed enclosure - purpose-built for serious 48V off-grid solar, marine, RV, and backup power systems. With 80A continuous output (approximately 4,096W DC at 51.2V) and a 250A peak surge rating, this battery is engineered to handle high-demand inverter systems, marine house banks, and large-scale solar builds without compromise. What sets the V2-T apart is its user-serviceable 250A Eaton Class T fuse behind a sealed top service panel, offering an added layer of source protection that advanced users and professional installers demand.
Beyond raw power, the V2-T Elite integrates seamlessly with Victron GX devices via native CAN bus communication at 500 kbit/s, enabling DVCC charge control and full system visibility from a single dashboard. Built-in self-heating supports charging down to -30°C (-22°F) ambient, while the IP67-rated enclosure stands up to dust and temporary water immersion - making this battery equally at home in a marine bilge compartment, an off-grid cabin, or an expedition vehicle. An 11-year limited warranty and 3,500+ cycle lifespan back every unit, making it a long-term investment in reliable energy independence.
Key Features
- 5.12kWh Stored Energy: 51.2V nominal, 100Ah capacity - plan usable runtime on approximately 4,096Wh (80% of nominal).
- 80A Continuous / 250A Peak Output: Sustains approximately 4,096W DC at 51.2V continuously; handles 250A surge discharge for up to 10 seconds.
- User-Serviceable 250A Eaton Class T Fuse: Mounted behind a sealed top service panel for easy replacement without opening the case - improves source protection at the battery level.
- Native Victron CAN Bus Communication: Connects to Cerbo GX, Ekrano GX, or Cerbo GX Mk2 at 500 kbit/s; with DVCC enabled, the battery sets charge voltage and current limits for all Victron chargers. Communication harness included.
- Bluetooth Monitoring via Epoch Cloud App: Included battery gauge streams state of charge, voltage, current, temperature, cycle count, and alerts to the free Epoch Cloud app (iOS and Android).
- Self-Heating for Cold Climates: Internal heating pads powered by incoming charge current enable charging from -30°C (-22°F) ambient; discharge supported down to -20°C (-4°F).
- IP67-Rated Enclosure: Dust-tight and protected against temporary immersion in up to 1m of water for 30 minutes with all seals and glands installed.
- Parallel Expandable - Up to 16 Batteries: Scale from one 5.12kWh unit to an 81.92kWh bank using matched C48100A-A batteries in parallel. Series connections are not supported.
- Advanced Smart BMS: Protects against overcharge, over-discharge, over-current, short circuit, and high/low temperature extremes. Cells certified to UL 1642, UL 9540A, and IEC 62619:2022; internal fuse to UL 60691; UN 38.3 transport certified.
- 3,500+ Cycle Life & 11-Year Limited Warranty: Rated to 3,500+ cycles to 70% remaining capacity. Warranty includes 5 years of free repair or replacement, then 40% off MSRP through Year 11.
What's Included
- 48V 100Ah V2-T Elite Series LiFePO4 Battery
- Victron communication harness
- Battery gauge (Bluetooth, mountable external power button included)
Why You'll Love It
The V2-T Elite Series is trusted by off-grid solar installers, marine electricians, RV builders, and Victron system integrators who need a LiFePO4 battery that performs as hard as the systems it powers. With native Victron CAN integration, self-heating capability, and a user-serviceable Class T fuse, this battery is engineered for real-world complexity - not just spec sheets. The IP67 enclosure and maintenance-free LiFePO4 chemistry mean you can install it and count on it for years of daily cycling without watering, equalizing, or babysitting. Whether you're powering a remote cabin, an offshore vessel, or a high-capacity Victron solar build, the 5.12kWh capacity and 16-battery parallel expansion give you a clear path from a single battery to an 81.92kWh bank as your needs grow. Backed by an industry-leading 11-year limited warranty and US-based technical support, this is energy storage you can build a system around with confidence.
Product Specifications
View Product Specs
| SKU | C48100A-A |
|---|---|
| Nominal Voltage | 51.2V (48V nominal system) |
| Capacity | 100Ah |
| Energy Capacity | 5.12 kWh nominal (plan on ~4,096Wh usable) |
| Continuous Discharge | 80A (~4,096W DC at 51.2V) |
| Peak Discharge | 250A for up to 10 seconds |
| Max Charge Rate | 80A continuous (90A for up to 5 seconds) |
| Cycle Life | 3,500+ cycles to 70% capacity |
| Bulk / Absorption Voltage | 56.8V |
| Float Voltage | 54.0V |
| Charging Temperature Range | 0°C to 55°C (32°F to 131°F) cell; with self-heating, from -30°C (-22°F) ambient |
| Discharge Temperature Range | Down to -20°C (-4°F) |
| IP Rating | IP67 (dust-tight; temporary immersion to 1m for 30 min) |
| Internal Fuse | 250A Eaton Class T (user-serviceable, behind sealed top panel) |
| Communication | CAN bus at 500 kbit/s (Victron GX compatible) |
| Bluetooth | Yes - via included battery gauge; Epoch Cloud app (iOS & Android) |
| Parallel Expansion | Up to 16 batteries (1,600Ah / 81.92kWh) |
| Series Connection | Not supported |
| Length | 20.86 in (529.8 mm) |
| Width | 8.65 in (219.8 mm) |
| Height | 12.06 in (306.3 mm, including terminal posts) |
| Weight | 97 lbs (~44 kg) |
| Cell Certifications | UL 1642, UL 9540A, IEC 62619:2022 |
| Fuse Certification | UL 60691 |
| Transport Certification | UN 38.3 |
| Warranty | 11-year limited (5 years free repair/replacement, then 40% off MSRP through Year 11) |
| Shipping | Available to ship; due to weight (97 lbs), typically ships freight - lift with two people and install upright |
| Assembly Required | No assembly required; wiring and DIP switch configuration required for Victron integration (see user manual) |
FAQ
Can I connect this battery in series to get 96V?
No - the C48100A-A is a native 48V battery and must not be connected in series. Series-parallel configurations are also not supported. You can only expand capacity by connecting up to 16 matched C48100A-A batteries in parallel, which scales your bank up to 1,600Ah and 81.92kWh at 48V nominal.
Does this battery work with my Victron Cerbo GX or Ekrano GX?
Yes. The V2-T Elite has native CAN bus communication at 500 kbit/s and is compatible with the Cerbo GX, Ekrano GX, and Cerbo GX Mk2. The communication harness is included. With DVCC enabled on the GX device, the battery automatically sets charge voltage and current limits for all connected Victron chargers. Follow the DIP switch and GX settings in the user manual to complete setup.
Will the battery charge in freezing temperatures?
Yes - the built-in self-heating system uses incoming charge current to warm the internal heating pads before allowing charge current to reach the cells. This supports charging from ambient temperatures as low as -30°C (-22°F). Note that below freezing there will be a short delay before the state of charge starts to rise, as the BMS prioritizes heating first. Discharge is supported down to -20°C (-4°F).
What is the difference between the V2-T and a standard V2 model?
The key difference is the user-serviceable 250A Eaton Class T fuse mounted behind a sealed top service panel on the V2-T. If the fuse opens, you can replace it without opening the battery case - improving source protection and serviceability for high-current 48V systems. All other features (Victron CAN integration, Bluetooth, self-heating, IP67 enclosure) are shared across the Elite Series lineup.
Do I still need an external fuse or breaker with the V2-T?
Yes. The built-in Class T fuse improves source protection at the battery but does not replace the main disconnect or downstream overcurrent protection. You still need to install a DC-rated fuse or circuit breaker in the positive conductor as close to the battery as practical, and size all cables correctly for your system. For marine and RV installations, follow the applicable electrical codes that govern fuse placement distance from the battery.
How do I monitor multiple batteries in a parallel bank?
The Epoch Cloud app (free, iOS and Android) supports whole-bank monitoring when connected through the included battery gauge via Bluetooth. You can view state of charge, voltage, current, temperature, cycle count, and alerts for each battery individually or as a bank. For Victron GX users, the GX device also displays bank-level data including the number of modules online and total installed capacity once DVCC and the Epoch BMS settings are configured correctly.
Is this battery a drop-in replacement for a Group 8D lead-acid battery?
It is close in size but not a guaranteed drop-in fit. Before installing, confirm your battery tray dimensions, hold-down hardware, and lid clearance against the V2-T's dimensions (20.86" L x 8.65" W x 12.06" H, 97 lbs). An optional Epoch V2 and V2-T mounting bracket (8D size, sold separately) fastens to the threaded inserts on the case to help secure the battery in an 8D tray. You will also need to reprogram your charge sources for LiFePO4 charging parameters.
Thank you for trusting us with your order! This product is shipped directly from the manufacturing warehouse to get to customers all over the U.S. as soon as possible!
While many of our products are prepared and shipped out within 48 hours, some of our items are built to order or require custom pieces that could take 2-6 weeks to prepare before shipping! Please contact us at 888-884-2234 for a delivery ETA if you have a strict timeline.
Thanks!
Omaha Sports & Games Team
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase. To start a return, you can contact us at service@omahasportsandgames.com.
If your return request is accepted, it will be up to you as the buyer to return the item in its original packaging, unworn and unused. You as the buyer will be responsible for paying the return shipping. We may be able to assist you in scheduling a pickup for return but the payment will still be your responsibility. You can always contact us for any return question at service@omahasportsandgames.com.
All products are subject to a minimum 15% restocking fee based on the quality of the returned product and packaging.
Items opened, tested, used, or any other non-new condition may be eligible for return based on the manufacturer's return policy.
Shipping Damages and Issues
You must inspect your order upon reception and refuse delivery if you see damage. DO NOT sign for delivery if there is apparent damage to the product. If you sign for the delivery and later claim shipping damage, there is very little we can do to help.
If your order does not require signing at delivery and is instead just dropped off at doorstep with damage, contact us immediately with photos of the damaged boxes.
If your item(s) is defective, damaged or if you receive the wrong item, contact us immediately so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, such as custom products, special orders or personalized items. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items, gift cards, or multiple product bundle discounts.